Question 1

What is a vertical machining center?

Accepted Answer

Horizontal and vertical three-axis machines differ primarily in the inclination of the spindle, with the spindles of horizontal machines parallel to the surface of the machine table and the spindles of vertical machines perpendicular to the surface, although individual constructions vary widely to support different applications.

For a vertical machining center, the X-axis controls left-and-right movement, parallel to the workholding surface; the Y-axis controls front-and-back movement, perpendicular to the X- and Z-axes; and the Z-axis controls up-and-down movement. Most machines use a fixed spindle and a moving table, or a fixed table and a moving spindle. Spindle rotation is never considered an axis.

Source: Machining 101: What are Machining Centers?

Question 2

What is a machining center?

Accepted Answer

Typically, machining centers are numerically controlled machines with multipurpose capabilities. This flexibility not only allows for productivity improvements but also allows for one machine to replace several single-purpose machines.

Machining centers provide the ability to perform several operations on a workpiece, from roughing to finishing, with a single setup.

Question 3

What are some things to consider when buying a VMC?

Accepted Answer

Accuracy and Repeatability

The ability to machine parts to a tight tolerance and to do so time after time must be considered. That is where a machine’s design and construction come into play.

Thermal Growth and Components That Counter It

Machine stability is primarily affected by thermal growth. Spindles generate heat, as do ballscrews, machine tables and guideway systems. In addition, the faster a machine moves, the more friction and heat it generates. This heat contributes significantly to changes in the size and position of machine components, causing a machine to “grow” or distort and the location of the spindle nose or tool point to move unpredictably. Because of these shifts, one of the biggest challenges of five-axis machining is the inability of the control system to calculate the exact position of axis pivot points at all times.

A Firm Foundation

A machine’s foundation and placement on the shop floor can greatly affect performance. Although it may be OK simply to set commodity machines on an existing concrete or wood floor, machining at high rates with rapid axis acceleration may require the machine to be tied down so it doesn’t “walk” across the floor. Heavy depths of cut on some materials also may cause excessive vibration, requiring the machine to be securely anchored to the floor.

Spindle Speeds, Torque and Horsepower

Selecting a machine with the appropriate range of spindle speeds is a critical consideration. The trends in recent years have been toward coated tooling, smaller tools, shallower depths of cut and higher feed rates. Smaller tools require a higher spindle speed. Faster feeds and speeds deliver better surface finishes.

CAT, BT and HSK

After selecting the spindle that best meets the horsepower, spindle speed and torque requirements comes selecting the type or style of tooling taper and its size. Tooling taper refers to the peculiar cone shape of the portion of a toolholder that fits inside the opening of the spindle. Every spindle is designed to accept a certain standardized taper style and size. Other styles or sizes cannot be used. Three taper styles are primarily used today: CAT, BT and HSK.

Selecting the Spindle Taper Size

The size of the spindle taper and the corresponding shank taper has much to do with the weight and length of the tools being used and the amount of material to be removed.

Selecting the Toolchanger

The toolchanger specified for a new VMC must have an adequate number of tooling pockets and be able to accommodate the size and weight of the cutting tool assemblies.

Coolant Concerns

For certain applications, optional provisions for delivering coolant at high pressure directly through the spindle are recommended. Coolant pressure as high as 1,000 psi is intended to promote chip evacuation from deep bores in which chip breaking is directed at the tool point.

Chip Removal

Chip removal is an important consideration that is often overlooked in the evaluation of a new CNC machine. Whether chips are evacuated from the machining zone with water, oil or air jets, they will fall to the bottom of the machine. A smaller volume of chips can be removed by an auger, which is typically standard on most VMCs, but a large volume of chips may require a conveyor.

Source: Buying a VMC: Considering Structure and Stability

虚拟机中心

精处理自动化机器传送快速成功路径

垂直断层中心:基本阅读

Machining101:machining中心是什么

CNC Machining为何开放最大Aditive制作秀

Machining长段时机器商店气候问题

为何双滑VMC双叉不双脚打印

VMC购买工具交换器、冷却器交付和芯片清除

FAQ:垂直断层中心

垂直断层中心供应商

垂直断层中心类

Preail定位:设计人际进程

垂直拉特执行重自

VMC增强可靠性五轴制作

垂直 Machining中心设计弹性

五轴离岸时做什么

重工程:移动大型机器工具复杂物流

监视:machinist视图